This is used in libGL to determine a preferred visual. glxinfo -v will also
report "visualCaveat=Slow" for such visuals.
(cherry picked from commit d5c17f585a)
Also merge sun_bios.c into sun_vid.c and upstream Solaris patch to
keep aperture device open, to allow mappings to occur after X server
has given up uid 0.
Maybe one day I stop doing stupid patches like
a3a7c12fcf.
So, if X < low, reset to low, and _not_ to high.
If X > high, reset to high, and _not_ to low.
It seems that we were calling copy_completed: too soon. Now we return instead
of falling through to the free_propdata, and copy_completed:.
(cherry picked from commit 5797d5b662)
This may work, unfortunately I don't have test apps that fail.
The way it works is by using an NSImage class initWithPasteboard:
method, which we then get the TIFFRepresentation of, and convert
to PNG or JPEG.
The TIFFRepresentation uses NSTIFFCompressionNone; which should be
lossless.
(cherry picked from commit 8d048cfa95)
This gives us a *lot* more visuals, and they should be more accurate.
Some of the visuals may have been wrong before. This may enable more
OpenGL programs to behave correctly.
I also suspect libGL needs a little work to handle some of these correctly.
(cherry picked from commit 98a084ce9c)
This consists of two parts:
In the implicit server layout, ignore those drivers when looking for a core
device.
And after finishing the server layout, run through the list of devices and
remove any that use mouse or kbd.
AEI is mutually exclusive with the kbd and mouse drivers, so pick either - or.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
The precedence of == is higher than that of &, so that code was
probably buggy.
xf86Init.c: In function 'DoModalias':
xf86Init.c:300: warning: suggest parentheses around comparison in operand of &
xf86Init.c:304: warning: suggest parentheses around comparison in operand of &
xf86Init.c:308: warning: suggest parentheses around comparison in operand of &
xf86Init.c:136: warning: function declaration isn't a prototype
xf86Init.c:243: warning: function declaration isn't a prototype
xf86Init.c:249: warning: function declaration isn't a prototype
xaaInit.c: In function 'XAAInit':
xaaInit.c:201: warning: implicit declaration of function 'miInitializeCompositeWrapper'
xaaInit.c:201: warning: nested extern declaration of 'miInitializeCompositeWrapper'
Add missing includes to fix the following warnings:
xf86DGA.c: In function 'DGAProcessKeyboardEvent':
xf86DGA.c:1050: warning: implicit declaration of function 'UpdateDeviceState'
xf86DGA.c:1050: warning: nested extern declaration of 'UpdateDeviceState'
xf86Xinput.c: In function 'xf86ActivateDevice':
xf86Xinput.c:303: warning: implicit declaration of function 'AssignTypeAndName'
xf86Xinput.c:303: warning: nested extern declaration of 'AssignTypeAndName'
xf86Xinput.c:311: warning: implicit declaration of function 'DeviceIsPointerType'
xf86Xinput.c:311: warning: nested extern declaration of 'DeviceIsPointerType'
xf86Xinput.c:324: warning: implicit declaration of function 'XkbSetExtension'
xf86Xinput.c:324: warning: nested extern declaration of 'XkbSetExtension'
Add automatic detection of the graphic driver to load for sbus devices.
This allows xorg to work on those devices without a "Device" section.
Debian bug#483942.
Signed-off-by: Julien Cristau <jcristau@debian.org>
We need to revisit the GL/indirect.c changes. I think indirect.c should
be using the same feature detection and GLX visual config code. The
indirect changes will require testing...
(cherry picked from commit 49b7a7c6f2)
Also set AutoAddDevices and AutoEnableDevices to their defaults.
And in doing so, switch the rest of the defaults over to named intializers.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Add dump_prefs() for instrospection.
Make prefs_get_bool a little more clear.
In get_property don't assume that the Mac realloc(NULL, 0); returns
non-NULL. We shouldn't depend on implementation-defined behavior too
much.
Add more commentary in various spots.
Add TARGETS in the TARGETS response. I don't know why some X11 apps
do this, but it could be something that some weird toolkit/app tests
for.
In reload_preferences add preferences synchronization, so that xpbproxy
reloads the preferences, and picks up any changes.
Fix a typo/misspelling of the sync_clipboard_to_pasteboard preference.
(cherry picked from commit 165cbbb90c)
Usually, the console is set to RAW in the kbd driver. If we hotplug all input
devices (i.e. the evdev driver for keyboards) and the console is left as-is.
As a result, the evdev driver must put an EVIOCGRAB on the device to avoid
characters leaking onto the console. This again breaks many things, amongst
them lirc, in-kernel mouse button emulation and HAL.
This patch sets the console to RAW if AllowEmptyInput is on.
Use-cases:
1. AEI is off
1.1. Only kbd driver is used - behaviour as-is.
1.2. kbd and evdev driver is used: if evdev does not grab the device,
duplicate events are generated.
2. AEI is on
2.1. Only evdev driver is used - behaviour as-is, but evdev does not need
to grab the device anymore.
2.2. evdev and kbd are used: duplicate key events are generated if evdev
does not grab the device.
1.2 is a marginal use-case that can be fixed by adding a "grab" option to the
evdev driver (update of xorg.conf is needed).
2.2 is an issue. If we have no ServerLayout section, AEI is on, but devices
specified in the xorg.conf are still added [1], resulting in duplicate events.
This is a common configuration and needs sorting out.
[1] 2eaed4a10f
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
I've seen about one case in three years where this has actually been
correlated with the real cause of failure, and we've trained people to
freak out about X_WARNING, so let's be less alarmist.
Very cute, Samsung, not only do you claim to be 16cm by 9cm in the
global size record, you also claim to be 160mm by 90mm in the detailed
timings. Grrr.
If absolute events were posted, dixflags got set conditionally on whether the
valuators are different from the last posted set of values.
If dixflags are undefined however, the DIX interprets them as relative
valuators. Fix this by making sure defining dixflags is always defined.
X.Org Bug 17724 <http://bugs.freedesktop.org/show_bug.cgi?id=17734>
NIDR should be used to create a new SD from e.g. within a driver.
DIDR should be used to remove a device from the server.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Use ErrorF for an error message after an xcalloc failure, and return instead of falling through to GlxSetVisualConfigs, or abort()ing at the test branch.
(cherry picked from commit 1056700971)
If you need to bail out the server, use Ctrl-Alt-Fx, or enable zapping
if it bothers you that much. If Ctrl-Alt-Fx is broken, nag me until
it's permanently fixed.
The nvidia driver currently uses these hooks to work around problems where RAC
will disable access to the hardware at unexpected times. This change restores
these hooks until we can come up with a better API for working around RAC.
This reverts commit c1df4fbede.
The nvidia driver currently uses these callbacks to work around problems where
RAC will disable access to the hardware at unexpected times. This change
restores these hooks until we can come up with a better API for working around
RAC.
This reverts commit d7c0ba2e9e.
Conflicts:
hw/xfree86/loader/xf86sym.c
Some BIOSes (hi XGI!) will attempt to enumerate the PCI bus by asking
for the config space of every possible device number. This despite
perfectly functional BIOS methods to enumerate the bus exactly.
If anyone can come up with an example of a bus where:
- both i/o and memory resources are addressable
- access to them can be controlled
- but they can't be controlled independently
then by all means, reinstate this logic.
instead of calling CFRunLoopRun() directly. The leak wasn't reproducible on
this machine, but someone was able to produce a leak trace with Instruments
that indicates it was leaking in the CFRunLoopRun() path.
x-input.m: dequeue and ignore events when pbproxy_active is false.
x-selection.h: add an is_active method that is used by x-input.m to ignore
events.
x-selection.m: Handle nearly every preference, except for primary_on_grab,
which I don't really understand yet.
(cherry picked from commit 4d51ad851e)
Remove some unnecesssary headers.
Remove some dead code that was never called or used in pbproxy.
Make use of an NSAutoreleasePool in x_init. It could potentially cause a leak
on a startup without this.
Start adding reload_preferences to the x_selection class, as well as event
handling for that.
(cherry picked from commit 602e8ba8f7)
Fix the usage of the NSString cStringUsingEncoding: - it doesn't NUL
terminate the string, which lead to a bus error. So, we use
lengthOfBytesUsingEncoding: to get the length in bytes instead of
strlen().
(cherry picked from commit 6333d619e7)
2 of the paths leaked, when INCR transfers were done. Now we
are leak free according to the leaks program for all transfers
I have tried so far.
(cherry picked from commit aa98db576b)
NSAutoreleasePool. Now the usage is consistent. In x_input_run()
we create a pool, and release it after processing the XEvents.
Add some getpid() output to main for debugging. It needs a bit more
testing before the next release.
Don't retain the NSPasteboard as the old code did. That may have
contributed to the leak, and it made it so that we needed the
NSAutoreleasePool created in main().
Remove the _known_types, and _pasteboard instance variables from
the x_selection class. They aren't needed anymore.
The leaks program now indicates 0 leaks after some usage. I want
to test further, but this seems much better, and my memory usage
graph indicates it's not growing.
(cherry picked from commit b245d84a72)
macro causes a leak (according to the leaks program).
Attempt to fix several other leaks with release method calls.
For some reason the process still grows more than it should...
I will need to use some better methods than leaks, and malloc_history
I suspect. Whatever is leaking, it's hard to find. I need to isolate
the cases more.
Add a missing image/jpeg branch.
Remove read_prop_32 - it's not used.
(cherry picked from commit 63a680354d)
According to the press release:
Previous SGI contributions to the free and open source community
are now available under the new license. These contributions
include the SGI® OpenGL® Sample Implementation, the GLX™ API and
other GLX extensions.
[...]
"SGI has been one of the most ardent commercial supporters of free
and open source software, so it was important to us that we continue
to support the free software development community by releasing our
earlier OpenGL-related contributions under this new license," said
Steve Neuner, director of Linux, SGI. "This license ensures that all
existing user communities will benefit, and their work can proceed
unimpeded. Both Mesa and the X.org Project can continue to utilize
this code in free software distributions of GNU/Linux. Now more than
ever, software previously released by SGI under earlier GLX and SGI
Free Software License B is free."
"The GLX API" is here read to include the original GLX source release
from:
http://www.sgi.com/products/software/opensource/glx/download.html
ftp://ftp.sgi.com/sgi/opengl/glx/glx1_2.1.tgz
which includes glxext.c as included in XFree86, from which our copies
in glx/ and hw/dmx/glxProxy/ are derived.
Move the struct atom_list into the x-selection class, so that it's
no longer a global variable named atoms. This may ease pthread
integration and reduce the chances of symbols conflicting.
(cherry picked from commit c1403c713c)
We may need another branch to convert a PICT to a PNG or JPEG. For now
TIFF works well in all of the test image copying apps when converted to
PNG or JPEG with an NSBitmapImageRep class.
(cherry picked from commit adf339d8f9)
INCR transfers mixed with a CLIPBOARD change.
Fix a bug with some UTF-8 transfers. I can only guess that my UTF-8
tests before were inadequate. I can now copy/paste any characters between
uxterm and Textedit.app.
(cherry picked from commit 7ca1532e8e)
to verify that the behavior didn't change.
main.m: XInternAtom compound_text, and atom_pair.
pbproxy.h: Add compound_text and atom_pair to the struct atom_list.
x-selection.m: Add an #include of Xutil.h. Refactor the reply struct
initialization to be done in a common place. Add send_reply: to simplify
the code a bit more. Add send_compound_text: which handles the
COMPOUND_TEXT type. Add the beginnings of a send_multiple:. Change
handle_image:extension: to handle_image:. The extension: message isn't
needed anymore.
(cherry picked from commit 1e9460abdf)
We can now copy and paste images to and from X11. Text copying and
pasting works as well.
The NSPasteboard can contain TIFF or PICT images, and pbproxy will
translate to an image/png or image/jpeg request, and list those in the
TARGETS.
I added a description of the basic design at the top of x-selection.m.
I removed the request_data x_selection class struct. It's not needed.
(cherry picked from commit 4a8daf8846)
to a TIFFRepresentation for use with NSPasteboard.
This has been tested with the Gimp and works with some minor quartz-wm changes.
The Finder clipboard shows the image updates after an Edit -> Copy.
(cherry picked from commit 12912adaee)
This change adds some [self own_clipboard] calls in the necessary places to get the proper greedy behavior.
UTF8_STRING and STRING properties seem to work well now with the test cases (PRIMARY, and CLIPBOARD). I can copy from several different X apps, and have the behavior be correct when pasting. I also verified that quartz-wm isn't doing the copying, by disabling the quartz-wm paths.
(cherry picked from commit 934669f732)
Add TRACE() calls where appropriate to try to figure out why we are losing CLIPBOARD at times, after transferring PRIMARY to the NSPasteboard.
Use the new pbproxy_clipboard_to_pasteboard where appropriate.
(cherry picked from commit 40190675a6)
Convert the puts usage to use DB().
Add the initial handle_image method.
Check for nil in the NSString instantiation in various places.
Add some commentary to enhance the clarity of why I did some things.
(cherry picked from commit 37361567b6)
Under the terms of version 1.1, "once Covered Code has been published
under a particular version of the License, Recipient may, for the
duration of the License, continue to use it under the terms of that
version, or choose to use such Covered Code under the terms of any
subsequent version published by SGI."
FreeB 2.0 license refers to "dates of first publication". They are here
taken to be 1991-2000, as noted in the original license text:
** Original Code. The Original Code is: OpenGL Sample Implementation,
** Version 1.2.1, released January 26, 2000, developed by Silicon Graphics,
** Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc.
** Copyright in any portions created by third parties is as indicated
** elsewhere herein. All Rights Reserved.
Official FreeB 2.0 text:
http://oss.sgi.com/projects/FreeB/SGIFreeSWLicB.2.0.pdf
As always, this code has not been tested for conformance with the OpenGL
specification. OpenGL conformance testing is available from
http://khronos.org/ and is required for use of the OpenGL logo in
product advertising and promotion.
The check can fail because the output from FBIOGET_VSCREENINFO is used to set
Clock in fbdev2xfree_timing(). Then in fbdevHWSetMode(), xfree2fbdev_timing()
is called which sets the pixclock based on Clock. The resulting circle results
in slight rounding errors, causing the comparision check in fbdev_modes_equal
to fail.
- Redo damage naming for more consistency.
- Call post submission functions only where appropriate.
- EXA can now live without it's odd damage workarounds.
stuck-modifier fixes (capslock)
3button-emulation now doesn't send the modifier key with the click
Added other options to fake_button2 and fake_button3 defaults options:
({l,r}{control,alt,command,shift})
(cherry picked from commit 8fb6a1cf44)
(cherry picked from commit ae9c1b3cfb)
No point warning about missing driver hooks, that just means the person
who gave you the driver is inept. Might as well just crash. Also,
just name anonymous screens as screen%d instead of failing after the 36th
screen. Bonus points if you can figure out what the failure mode would
be on the 36th screen, and what the effective screen limit was.
There is no way this code can have been building for anyone since pciaccess
was merged. BSD and Linux were already using OS code on sparc, the only
people who could want this are Solaris, who should be using pciaccess
anyway.
This code was effectively only used in ix86Pci.c to select PCI config
access type. Nobody should be using that path anymore, in the glorious
pciaccess world; kernel services should get it right for you.